Power Integration

April 15, 2010 5:15 am

Energy Saver, UPS systems & Servo Voltage Stabilizer
 
Power Integration is a company established in 1997 by a team of entrepreneurs with over 18 years of experience in the field of power electronic & electronics engineering, it is  an ISO 9001: 2000 certified company. The products manufactured by Power Integration are DC Power Supply, Energy Saver, UPS systems, Servo Voltage Stabilizer, Solid State Stabilizer, Oil Cooled Servo Stabilizer, Power Inverters & Bridge Rectifier.
 
Products:
Energy Saver: The energy saver is designed specifically for industrial lighting load i.e. halogen lamp, mercury vapour lamp, bunch of tube lights etc. The energy saver can save energy when connected in between M.S.E.B and any lighting load. The Secura energy saver is digital microcontroller based and works on the basic principle of a servo controlled voltage stabilizer where in stabilized voltage at the output of the saver can be programmed with respect to real time clock.
 
Servo Voltage Stabilizers: Capacity range of single phase- 1KVA to 25KVA, Capacity range of three phase- 3KVA to 75KVA (Air Cooled), Capacity range of three phase- 15KVA to 500KVA (Oil Cooled) and Customaries I/P & O/P Range.
 
Oil Cooled Servo Stabilizer: Capacity Range Of Three Phase- 15KVA To 500KVA for Oil Cooled. Customaries I/P & O/P Range.
 
Power Inverters: Capacity Range is 350VA To 3KVA. Backup Time- 2hrs To 8hrs, Battery Voltage- 12V DC, 24V DC, 36VDC, 48VDC depends on Model.
 
Bridge Rectifier: Use to convert the AC to DC current. These can be also customised as per client’s specific requirements. The range of bridge rectifiers includes: Half Wave and Full Wave Bridge Rectifiers.
 
DC Power Supply: The power integration Power Supply features regulated DC outputs. Output is fixed or continuously variable. All supplies are fully current limited and short circuit protected. Available fully assembled.
 
UPS Mix Load: Capacity Range- 1KVA to 3KVA, backup time- 30mins to 8hrs, battery voltage- 24V DC, 36V DC, 48V DC depends on model.
 
Contact:
 
Power Integration
H. No. 3451, S. No. 140,
Behind Shivajirao Bhosale Bank,
Warje Malwadi, Pune – 411 001, Maharashtra
Tel: +91-20-25291375
power-int@vsnl.net