Optimising quality assurance in parts cleaning

January 23, 2013 5:26 am

Optimising quality assurance in parts cleaning
EcoCLab – fully automatic VDA 19 compliant in-line cleanliness testing system
Since the introduction of VDA 19, the task of monitoring technical part cleanliness has gained huge importance. One major drawback of cleanliness testing used to lie in the associated time-consuming and costly laboratory methods. With its new EcoCLab system, Dürr Ecoclean now offers an automated in-line capability for inspecting and documenting particulate cleanliness in compliance with VDA 19. Thanks to this technology, results are obtained much faster and process reliability increases significantly.Particulate cleanliness constitutes one of the most important quality factors today, both in the automotive industry and in numerous other manufacturing sectors. However, checking and documenting this so-called technical cleanliness presents a challenge to OEM and tiered suppliers alike. Quite often the particles specified as critical are found on interior part surfaces, e.g., inside the oil passages of a crankcase, so that tests relying on direct measurement methods are not feasible. In accordance with VDA 19 or ISO 16232, residual contamination analyses are then carried out in a separate laboratory. Here,
particulate contaminants are first extracted from the part by means of a fluid before being collected on a filter and subsequently analysed to customer specifications. This process, being decoupled as it were from the manufacturing environment, involves a time delay in the quality control loop which harbours the risk that already assembled parts may have to be re-cleaned or parts already shipped may need to be recalled at a high expenditure of time and cost. Users have therefore been calling for an in-line testing capability in carrying out VDA 19 compliant residual contamination monitoring. And this is exactly what Dürr Ecoclean’s innovative EcoCLab provides – as the first ever system to perform testing of critical areas on individual parts (e.g., crankcases) directly in the manufacturing line.
Fully automatic check and documentation in just a few minutes’ timeFor the cleanliness test, the part to be analysed is conveyed – after drying – to the extraction unit of the compact in-line cleanliness laboratory. Here the areas to be examined – e.g., the oil passages – are sealed off and flushed with a defined volume of fluid. The particle load picked up is then extracted from the fluid by means of a filter. The particulate matter collected on the filter is recorded and documented by an integrated camera system. Next, both particle sizes and amounts are analysed. This makes it possible to judge both the total amount of particles and their size distribution. For instance, it can be certified that no particles larger than 600 µm are present in an oil passage. These findings are stored in the system’s memory and can be issued in hardcopy form via an integrated printer.

Advertising

Your future advertising space? Our media data