Lasers cutting blanks for the Smart Press Shop

By OEM Update Editorial July 28, 2021 7:37 pm IST

Apart from a servo press line, Porsche’s and Schuler’s fully-connected press shop also features a state-of-the-art blanking line.

At the beginning of June, Porsche and Schuler have started the operation of a fully-connected press shop in East German Halle (Saale). Apart from a servo press line with an output of up to 20 strokes per minute, the Smart Press Shop also features a state-of-the-art blanking line: A Laser Blanking Line 2.18 equipped with two cutting heads for processing strip material with a width of up to 1,880 mm.

Blanking lines with lasers do not require expensive and heavy blanking dies, which is why they are particularly suitable for the production of new parts or small batch sizes with frequent product changes. The continuously moving coil material is processed into blanks at high cutting speeds. Thanks to tooling-free scrap separation, a high output is also achieved. A gentle transport of sensitive materials such as aluminium is ensured, too.

The Laser Blanking Line is the ideal solution for the “Smart Press Shop” in Halle, which focuses on the production of aluminium outer skin parts in small batch sizes. By recording various measured values of the system as well as the coil material and by smart marking of the blank, the line which supplies the blanks for the servo press line forms the point of departure for a “Track and Trace” system.

For more info, visit: www.schulergroup.com